The Chief RPA Universal mount includes everything you need for a quick installation. This universal mount supports most invertible projectors. It has adjustable mounting legs for a customized installation. This Universal Projector Mount is coupled with the newly designed SLBU Universal Interface Bracket. This 2nd Generation Interface Technology has enhanced security and unlimited projector access.
Three mounting methods:
1. Flush mount to suitable ceilings using the four corner slots in top of the RPA Mount. The RPA allows you to flush mount without disassembly by providing suitable access for screwdrivers and socket sets. ±25 degrees of pitch when flush mounted. 12 degrees yaw possible on flush mount with slots in top of RPA (Hardware not included).
2. 1/4" Threaded Rod using the four corner slots in the top of the RPA. (Threaded Rod not included.)
3. 1 1/2" NPT Threaded Extension Column using the threaded opening at the top of the RPA Mount. (Threaded Extension Column not included.)
Shifting the RPA-U:
You may need the LSB-100 Lateral Shift Accessory if your projector can not be installed in exact alignment with the projection screen.
Quick Disconnect/Reconnect:
To quickly and easily remove the projector from the ceiling, loosen thumbnuts connecting the SLB bracket to the universal top. Remove projector and SLB from universal top. The universal top retains the registration adjustments. This feature makes projector servicing and maintenance quick and easy by eliminating the need for re-registration. Security wrench included for use when thumbnuts are replaced with All-Points™ Security System hardware.